How to Remove Dark Water Stains From Wood!

how_to_remove_water_stains_banner

Affiliate Disclaimer: We're a participate in the Amazon affiliate program. Therefore, we may collect a share of sales or other compensation from the links on this page, at no extra cost to you!

How to Remove Dark Water Stains From Wood!

Introduction

You leave your water glass on your bedside table and bam! There’s a water stain within no time. Household furniture and items can lose their look and vibe if they have water stains on them. Removing them can be a menace. Worry not, we have you covered, but before we tell you how to clean the stain, you need to know if the stain is new or has been there for some time. The most common stains occur when the water has speared the finish of the wood. These are known as white water stains.

If the stain is new and fresh, remove it as quick as you can. Below are three easy steps to remove fresh stains from your favorite furniture piece.

Step 1: Buffing

Use a soft cotton cloth to absorb the water from the wood. A soft cloth ensures that the wood paint is not scratched. Once all the liquid has been absorbed into the cloth, you can move to the next step.

Step 2: Blow-drying

If you feel that the wood is still wet after buffing as there is still a clear, visible stain, you can always blow-dry the area to get rid of the unwanted moisture. Make sure you keep the dryer on a low setting. You don’t want to burn the finish and leave heat marks, do you?

Step 3: Polishing

Now that the affected area is completely dry use an oil-based polish like the Howard Products FW0016 Feed-N-Wax Wood Polish to cover it. Any stain still left will now be removed, and your problem is solved.

Just three simple steps on time can save your wooden floor or furniture from the deadliest strains. The quicker you are, the easier it gets to remove them. However, if the stain and old and has gone deep into the wood, these steps may not be sufficient to get rid of them.

For these old stains, there are several remedies you can try.

1) Use a watermark remover

A watermark remover is a very useful tool to remove an old water stain. A piece of cloth simply rubbed on the stain will spare you costly repairs. Also, the watermark remover is a multi-tasking product beneficial not only when removing old water stains but also alcohol marks, heat or cold blemishes. It also helps to cover scratches and gives your furniture a new and fresh look. A perfect option is the Guardsman Watermark Remover Cloth that can very easily remove water stains as well as white rings, etc.

2) Use a hardwood floor cleaner

It seems a waste of money to hire a professional to wipe the stains off your hardwood floor or replace the hardwood only because it has lost its shine. Well, a hardwood floor cleaner is a perfect solution to save you from all the hassle so you can take household management into your own hands. It has to be sprayed onto the area bearing the stain and then the stain is to be cleaned using a damp piece of cloth or wipe. It will surprise you how easy the job is and if you are a clean freak, well it is time to have some fun. One great product choice is the Bona® 36-Ounce Hardwood Floor Cleaner Spray Bottle.

3) Mayonnaise!

Almost every household has mayonnaise, and one straightforward way to remove an old water stain is to take some mayo on a cloth, rub it over the stain and let it stay for an hour. Make sure the mayo stays wet and prevent it from drying by applying more mayonnaise on it, ensuring the area stays moist. Then clean with a cotton cloth. To your surprise, this conventional method will surely help you out.

4) Use a magic eraser

Another product that is produced commercially is the magic eraser perfect for helping you out with old water stains. All you need to do is buff a damp eraser with the grain of your wood and gently polish as normal. This will instantly freshen up the surface, making it good as new. A great choice is the Mr. Clean magic eraser.

5) Salt and Oil

Another conventional and easy way is to make a paste of some salt mixed in olive and gently apply it over the stain. After letting it say for 15 to 20 minutes, you will need to remove it with a cotton cloth. Once again, you will not be disappointed.

6) Use toothpaste

For this, use white toothpaste and not gel. After application, buff gently with wood grain and end with polishing. To remove tougher stains, add baking soda to the paste in equal quantity.

7) White Vinegar

After mixing white vinegar with olive oil, mix it in the wood grain, apply and then soak it with another cloth to bring back the shine.

8) Baking Soda

Mix a tablespoon of baking soda in a teaspoon of water and create a paste. Apply a layer on the stain and control the time of application according to how tough the stain is. Remove with a damp cloth and repeat if needed.

9) Use a hot iron

Set your iron on the lowest temperature. Put a thick cotton cloth over the stain and press it with the iron for a few seconds. The stain would be gone.

10) Butter and ashes

Take equal quantities of butter and cigarette ash and rub it on the stain with a cloth. The stain will go away when you clean the mixture off with a clean cloth.

If you have a black water stain kind of situation (a black water stain is one that occurs when the water has seeped beyond the finish and into the wood), bleaching using commercial bleach like the Liberon WB125 Wood Bleacher or applying toothpaste can be the best solutions. 

For unfinished woodwork, a gentle dishwashing soap such as the Dawn dish soap mixed with water can be applied using a cloth to remove stains. Sanding the stained area can also be a good idea.

Now get rid of all kinds of water stains in a few minutes without any professional help and keep your wooden flooring or furniture pieces as good as new!

More: If you’re having issues with mold, check out our article on How to Remove Mold from Wood!

Please follow and like us:
27
Visit Us
Tweet
Reddit